|
| |
|
|
| |
Locknut Series MSW M72 and higher
|
|
| |
 |
|
 |
|
| |
Designation of a locknut with d1 = M72x1,5 and hight h = 60mm:
Locknut MSW 72.60
The admissable operating loads specified in the table are guidline values calculated with a safety margin of 1.6.
- under static stress relative to the minimum yield point
- under dynamic stress relative to the minimum alternate strength
|
|
Subject to changes.
Special versions:
On request, by sending of an explanatory sketch.
|
|
| |
| CAD | | Code | Dimensions [mm] | clamping screws | adm. axial stress | Moment of inertia | | MSW from 72.60 | d1 | d2 | d3 | h | l | d4 | d5 | ISO 4762 | MA [Nm] | No. | dyn. [kN] | stat. [kN] | J [kgcm2] | | Ø | No. |  | 72·60 | M72x1,5 | 135 | 95 | 60 | 14 | 105 | 8 | 4 | M5 | 6,0 | 6 | 468 | 749 | 110,481 | | 85·60 | M85x2 | 160 | 110 | 60 | 14 | 124 | 8 | 4 | M6 | 10,0 | 6 | 807 | 1050 | 218,131 | | 105.66 | M105x2 | 190 | 136 | 66 | 15 | 150 | 10 | 4 | M6 | 10,0 | 6 | 0 | 1100 | 0,000 | | 125.72 | M125x2 | 215 | 154 | 72 | 16 | 172 | 10 | 4 | M6 | 10,0 | 6 | 0 | 1600 | 0,000 | | 140.78 | M140x3 | 240 | 176 | 78 | 17 | 196 | 10 | 4 | M6 | 10,0 | 8 | 0 | 2000 | 0,000 |
|
|
| |
|
|
| |
| CAD | | Code | Set screws | fixing screws | Aluminium thrust bolts | | MSW further Info | ISO 4028-45H | d6 | MD *) | No. | Factor A | ISO 4026 | No. | Ø | length | No. | | 72·60 | M10x45 | 7,0 | 34 | 8 | 0,76575 | M6x8 | 8 | 4,5 | 3 | 8 | | 85·60 | M12x45 | 8,5 | 60 | 8 | 0,91282 | M8x8 | 8 | 6,0 | 3 | 8 | | 105.66 | M12x50 | 8,5 | 60 | 9 | 1,09913 | M8x8 | 9 | 6,0 | 4 | 9 | | 125.72 | M16x55 | 12,0 | 140 | 9 | 1,42613 | M8x8 | 9 | 6,0 | 4 | 9 | | 140.78 | M16x60 | 12,0 | 140 | 9 | 1,42613 | M8x8 | 9 | 6,0 | 4 | 9 |
|
|
| |
*) Tightening torque recommended by screw manufacturer. |
|
| |
|
|
|
|
|
|
|
MSW - Info
(M72 higher)
>Benefits
>Function
>Execution
>Examples
>Connecting
components
>Screws
>Axial
pretensioning
>Assembly |
