Higher performance evaluation and the control of increasing levels of dynamic stress in the fields of mechanical engineering are only capable by the use of high quality machine elements. At the same time the required functions have to be realized in a most cost-effective way. SPIETH clamping sleeves offer an interrest solution for modern engineering: 

The simple to produce surrounding components can be done with common ISO tolerance levels. The existing assembling play always permits easy mounting even for large dimensions. The required narrow guidance play can be optimum adjusted during the mounting process, whereby minor geometrical errors in the surrounding components as well as operational influences such as increasing temperature, can be taken into account. If any wear is occurring, reajusting the play can compensate it.

For the FDK - FDL series the guide play is set by the configuration of the design. Some illustrations are shown in the assembly examples.

As a result, application of the FDK - FDL series needs more work for the surrounding components. However, this is offset by the benefit of trouble-free guide play reproduction after removal and remounting. In this case, a reproducible peripheral position of the guide bushing must be ensured by integrating the provided fixing pin.

The advantages resumed:

• Low-cost, ready-to-mount guide bushing.
   
• Existing assembling play ensures simple mounting even with large dimensions.
   
• Sliding friction in combination with minimum guide play possible.
   
• Optimum guide play adjustment possible during the assembly process.
   
• Simply produced connecting elements.
   
• Precise guidance through guide play adjustment.
   
• Provides the typical high damping performance characteristic for slideways.
   
• Fast dismantling capability addresses demands for convenient machine service and recycling.

  Back