| |
Designation of a locknut with d1 = M12x1:
Locknut MSR 12.1
The admissable operating loads specified in the table are guidline values calculated with a safety margin of 1.6.
- under static stress relative to the minimum yield point
- under dynamic stress relative to the minimum alternate strength
|
|
Subject to changes.
Special versions:
On request, by sending of an explanatory sketch.
|
|
| |
| CAD | | Code | Dimensions [mm] | clamping screws | factor | factor | adm. axial stress | Moment of inertia | | MSR up to 15·1 | d1 | d2 | d3 *) | d4 | d5 *) | d6 | h | l | e | ISO 4762 | MA [Nm] | No. | A [mm] | B [N] | dyn. [kN] | stat. [kN] | J [kgcm2] |  | 10·0,75 | M10x0,75 | 24 | 2,5 | 17,0 | 3,2 | 22 | 14 | 3,0 | 7 | M3 | 2,0 | 3 | 0,672 | 2457 | 12 | 16 | 0,025 | | 10·1 | M10x1 | 24 | 2,5 | 17,0 | 3,2 | 22 | 15 | 3,0 | 7 | M3 | 2,0 | 3 | 0,703 | 2457 | 12 | 15 | 0,027 | | 12·1 | M12x1 | 26 | 3,0 | 19,0 | 3,2 | 25 | 14 | 3,0 | 7 | M3 | 2,0 | 3 | 0,819 | 2438 | 14 | 19 | 0,037 | | 12·1,5 | M12x1,5 | 26 | 3,0 | 19,0 | 3,2 | 25 | 15 | 3,0 | 7 | M3 | 2,0 | 3 | 0,881 | 2438 | 13 | 18 | 0,040 | | 14·1,5 | M14x1,5 | 32 | 4,0 | 22,5 | 4,3 | 30 | 16 | 3,0 | 7 | M4 | 2,9 | 3 | 0,997 | 2995 | 17 | 22 | 0,096 | | 15·1 | M15x1 | 33 | 4,0 | 23,5 | 4,3 | 31 | 16 | 3,0 | 7 | M4 | 2,9 | 3 | 0,992 | 2984 | 19 | 25 | 0,108 |
|
|
